Every Boosted Lighting Solutions kit is engineered for a clean, plug and play install on the 2020+ Corvette C8. Watch the full walkthrough for your kit, take your time, and you will land a factory clean result.
TeamCorvette LED
Illuminated windshield emblem. Plan on 30 to 45 minutes. You will need a 10mm socket and the included trim tool.
- Battery access: remove the three frunk trim panels and the smaller trim piece near the base of the windshield.
- Wiring: connect the red wire to the positive terminal and the black wire to the negative terminal using a 10mm socket.
- Pairing: press the ON button. The lights blink green to confirm pairing.
- Alignment: use Button 3 for the alignment markers, then position the strip between the dashboard and the windshield.
- Routing: tuck the wiring behind the A pillar foam, down the door trim, behind the weatherstripping, and into the fender area.
- Secure: fasten the harness to the washer fluid line with the provided zip ties and trim the excess.
Engine Bay Lighting Kit
Premium RGBW lighting for the C8 engine bay. Watch the full install below, then set your colors and animations from the app.
Need a hand?
Reach out any time at info@boostedls.com and we will walk you through it.